Files
hermes-agent/tests/tools/test_connectors_managed.py
Siddharth Balyan ee2f5629b8 Desktop connect runs on the connection operation: one card, no link to the model, no renderer polling (NS-868) (#110574)
* refactor(connectors): cut comments that restate the code

Connector modules (tools/connectors, tui_gateway connector RPCs, desktop
connector card/store) keep only comments that carry a non-derivable why or
a cross-module contract. No behaviour change.

* feat(connectors): managed connect runs on the connection operation

Managed `connect` / `reconnect` mint one ConnectionOperation for every target and, on a
desktop session, block the tool turn until the operation settles; the result is per-target
outcomes and never carries a connect link. Off the desktop the result carries the links and
returns at once (PR3 delivers them as their own message).

Why: the previous leg handed the model a URL and a `wait` verb, and the renderer ran its own
2s poller on top of the backend's 5s one; both walked the whole gateway catalog at two vendor
calls per page to read one row (~3 Composio calls/s per pending target). A hidden composer
message started the model's `wait` on the user's behalf. None of it was observable from the
operation the MCP leg already used.

What the operation looks like now:
- `contract.py`: TargetState / Actor / SettleReason enums and the `(kind, from) -> {to: actor}`
  transition table. `operation.transition()` enforces it; a card cannot claim a managed
  target `connected`, only the backend watcher can.
- `live.py`: one open operation per session, found by `op_id`. `connectors.operation.status`
  reads it, `connection.respond` drives it, `pending_connection` on resume replays it.
- `run.py`: the one lifecycle for both target kinds (prepare -> card -> wake/observe loop ->
  settle -> result). The managed `observe` hook polls the gateway list once per tick for the
  whole operation; the exact-status route replaces that call when the gateway ships it.
- `connection.update` is emitted on every transition and on settlement; registered in the
  shared event contract with the operation vocabulary typed on the TS side.
- `wait`, `_rendered_links`, `_seen_instructions`, the just-minted bounce and `_clamp_timeout`
  are deleted. `force` on `reconnect` always reinitiates; plain `reconnect` repairs only what
  the gateway reports disconnected.
- `connections.wait_timeout_seconds` is removed from config defaults, the example and the
  docs. The deadline is `OPERATION_DEADLINE_SECONDS = 300` in `operation.py`; the key was
  added on this unmerged train so no migration is needed.
- Wire model: `statusReason` parsed on connection results; the seven-state `connectionStatus`
  is typed on list items and an unknown value fails validation; `CONNECTION_REQUIRED` carries
  `connect_card_available` instead of the link when the session platform is `desktop`.

Session platform, not callback presence, decides whether a card exists: the GUI bridge
attaches callbacks to every backend session, terminal TUI included.

* feat(desktop): connector card subscribes to the connection operation

The card renders from the backend's operation instead of driving its own: `connector-flow.ts`
(the renderer's 2s `connectors.list` poller, its 120s client deadline and `keepWaiting`) is
deleted, and both hidden composer submits in `connector-tool.tsx` go with it. The model is
never nudged into a `wait`; the tool call is blocked on the backend until the operation
settles.

- `connection-request.ts` is the operation store: keyed by `op_id`, one entry per session,
  `applyOperationStatus` / `applyConnectionUpdate` as pure reducers, `respond` leaves the
  entry in place (the backend answers with `connection.update`), `ConnectionTargetOutcome`
  is a discriminated union the backend's transition table accepts.
- `input-requests.ts` applies `connection.update`; `connection.expire` and the resume
  snapshot correlate by `op_id` (a snapshot has no `request_id`).
- `ConnectorOffer` renders one `ConnectorCard` per target from a single
  `Record<ConnectionTargetState, phase>` table; Connect opens the stored link, Try again on
  failed / expired reissues through `connectors.connect` on the open operation, Not now is a
  per-target `skipped`, Continue settles. A settled operation renders `ConnectorSummary` rows
  with no live control.
- `tool-render-class.ts`: `manage_connections` renders the card regardless of
  `HERMES_GUEST_ONBOARDING`; the flag still gates the onboarding flow, not the card. The
  backend gate already decided admission; a card only exists because the tool was admitted.
- `mcp-setup-tool.tsx` speaks the same outcome vocabulary (connected / skipped / failed).
- `ConnectorRow.connectionStatus` is the seven-state literal union, not `string | null`.
- The guided-onboarding poller (`first-build-connectors.ts`) keeps its own row/phase types
  and compiles unchanged; PR3 moves it onto the operation.

anti-slop: no net-new findings (17 touched files vs 11d1a12472).

* fix(connectors): the card never parks the tool thread; every update carries the snapshot

Found by the pre-PR adversarial review and a real-path E2E test (both left in the tree).

- The desktop `connection_callback` was still `_block("connection.request", ...)`, which parked
  the tool thread on a private request-id Event until a `_respond` that no longer exists for
  this event. `connection.respond` settled the operation but the tool waited its full deadline
  before the watcher loop even started. The callback now only emits the card; the operation's
  own wake loop is the wait. The MCP leg's blocking bridge goes with it: the card answers
  through `connection.respond` like every other card.
- `connection.request` and every `connection.update` frame carry the full target snapshot
  (state, link, detail). The initial mint happened before the card existed, so the renderer
  never saw the links and Connect stayed disabled; a Continue settlement stamped
  `not_connected` on the backend while the card still showed `initiated`. The store now
  overlays the snapshot; no state is reconstructed from deltas.
- The `connection.update` emitter is a class-level `on_change` slot on the operation, set
  once by `register()` (a second `register()` no longer stacks wrappers); session lookup takes
  `_sessions_lock`; a re-minted link on an `initiated` target goes through `refresh_link()`
  and emits, instead of a bare attribute write.
- `session.interrupt` is checked before the first observe, so an interrupted call settles
  `interrupt`, not `all_resolved`.
- A gateway list reporting `expired` for an initiated target is recorded with actor `clock`
  (the contract's owner of that edge); it raised `IllegalTransition` before.
- Dead `keepWaiting` i18n keys from the deleted renderer poller removed.

tests/tui_gateway/test_connector_operation_e2e.py runs the desktop lifecycle through the real
tool, registry, gateway RPC handlers and callback bridge with only the HTTP client faked.

* docs(connectors): prompts and docs describe the operation, not the deleted wait verb

The onboarding prompts told the model to call action="wait" with timeout_seconds and to
expect a hidden [setup]/[connectors] note; both are gone. tool-search.md and
toolsets-reference.md said the model gets a connect link on the desktop. tui_gateway/AGENTS.md
gains the connection-operation row of the surface table.

* fix(connectors): the panel re-mints only a dead link

Try again on a failed or expired target mints a fresh link on the open operation. A waiting
target keeps the link it was minted with; the card reopens it and connectors.connect refuses
to spend a second mint (LINK_STILL_VALID). The unused refresh_link() goes. The package
docstring names the new siblings; the nine-name public surface is unchanged.

* test(connectors): the local-batch test answers the operation the way the card does

The callback stopped returning an answer in f782b26d98 (the card answers through
connection.respond); this test still returned one and waited out the 300s deadline in CI.

* ci: retrigger

* fix(connectors): the desktop card appears outside guided onboarding

Live on a signed-in macOS desktop, the two-app connect never showed a card. Three
defects, each hidden by a test that bound state the running app never binds.

The backend read the surface from HERMES_SESSION_PLATFORM only. The desktop and TUI
gateway bind it as HERMES_SESSION_SOURCE (_set_session_context), so session_platform()
was "" and managed connects took the off-desktop branch: links in the model's message,
no operation. session_platform() now reads platform, then source. The E2E test binds
through server._set_session_context instead of set_session_vars(platform="desktop").

The renderer routed manage_connections to the card only under isOnboardingEnabled(),
the HERMES_GUEST_ONBOARDING launch flag, in message-parts.tsx and the run splitter in
fallback.tsx. tool-render-class.ts had already dropped that gate in this PR; the two
routers had not. Both now route on the tool name alone.

ConnectorTool resolved the session owner by the runtime id. Owner routes, hints and
session rows are keyed by the stored id, so in registry topology the owner never
resolved and the card rendered null while the tool blocked. It now resolves by the
stored id, matching the PR1.5 card and every other owner lookup.

message-parts-connectors.test.tsx mounts the real Fallback router with the onboarding
flag off and distinct runtime/stored ids; red before each renderer fix, green after.

* style(connectors): shorter comments, no module mock in the card router test

The router test mocked isOnboardingEnabled to false; jsdom has no preload bridge, so the
real function already returns false. Comments that restated the code are cut to one line.

anti-slop: no net-new findings (25 touched files)

* fix(connectors): Connect on a waiting row opens the stored link

ConnectorCard derived the button's loading state from the phase label, so a managed row that
read "Finish connecting in your browser" (every row, since links are minted up front) had a
disabled Connect button. Nothing on the desktop could open the sign-in link; every managed
connect ended skipped, not_connected, or at the deadline.

The card now takes `busy` for "the action itself is running" and keeps `phase` as a label.
The MCP card passes its in-flight flag; the connector card passes the re-mint wait. Red before:
the Connect button on an initiated row rendered disabled and a click opened nothing.

* fix(connectors): a settled card stays dead; the card binds to its tool call only

A second connect for the same apps revived the finished card on the old tool row. The
connection.request payload carried no id, so the renderer fell back to matching rows by
connector names, and any row with those names qualified, settled or not.

The operation now records the model's tool_call_id and sends it in connection.request and in
the resume snapshot. The card binds to the tool row with that id and to nothing else; the
name-match fallback is deleted. A payload without the id is rejected by the store.

`reason` is removed from the tool: it was the only text the card ever showed from the model
and its absence forked a second tool part, since `reason` doubled as the row-correlation key
in tool-parts.ts. The card never needed it.

`connection.expire` is deleted from the contract and from _EXPIRING_REQUESTS: the card is
raised with _emit, not _block, so nothing has emitted it since the operation lifecycle landed.

Sid's rule of record: a resolved card is fully dead; no path brings it back.

* fix(connectors): the watch loop settles once, on time, and never raises into the result

Three findings from the live review, one loop.

Continue racing a finished sign-in: the loop ran the gateway read, then settled. A read that
returned `connected` for an already-settled or failed target raised IllegalTransition out of
the tool and the model got a generic error instead of the per-app outcomes. The read now skips
targets that are not live (pending, initiated) and skips a settled operation; the loop checks
`settled` after every read.

Settle reason as row text: `settle()` wrote `continue`/`deadline` into each unresolved target's
`detail`, and the card printed it in red. The reason stays on the operation only.

Stop and the deadline waited for the next tick: `/stop` sets a per-thread flag with no wake
hook, so the sleep is sliced at 250 ms and the flag and clock are read each slice. The clock is
also checked before each read, not only after.

Tests: a failed mint that later reads connected settles cleanly; Continue during a read keeps
the settled result; no reason in detail; an interrupt settles within the same second.

* fix(connectors): MCP setup off the desktop returns unavailable instead of blocking

run_mcp_operation treated a non-None connection_callback as "a card exists". Every tui_gateway
session has that callback, the Ink TUI included, so an MCP install from the terminal UI blocked
until the 300 s deadline while the docs promised `unavailable` with the terminal commands.

The MCP path now reads the session surface the same way the managed path does; the callback is
never the predicate. Test binds the surface to `tui` with the callback attached.

* fix(connectors): a failed Try again shows the failure, not the old dead link

The panel's re-mint ignored the gateway's per-app status and moved the row to `initiated` with
whatever link came back, `None` included, so a mint that failed again rendered as waiting on the
link that had already died.

One reader of a mint response now serves both the first mint and Try again
(`managed.mint`, with the actor as a parameter). A repeated failure keeps the row `failed`,
drops the link, and carries the vendor's new text through `operation.refresh`, which emits a
frame without a state change so the card redraws.

* fix(connectors): a forced reconnect waits for the new sign-in before it reports connected

`reconnect` with `force: true` is the account switch. The vendor keeps the old account active
while the new link waits, so the first list read after the mint said `connected` and the
operation settled at once: the new link was dropped and the model was told the switch was done.

A forced target is marked awaiting_new_attempt after the mint. The watcher ignores its row until
the list shows the new attempt (`connectionStatus: initiated`) once, then trusts `connected`.

* fix(connectors): the operation registers under the gateway session key

The tool registered the operation under the agent's session_id; every RPC (connection.respond,
connectors.operation.status, the panel's connectors.connect) and the update emitter looked it up
by the gateway's session key. Those agree until compaction rotates the agent id mid-turn; then
the card's clicks find nothing, no update reaches it, and the tool waits out the deadline.

The registration key is now the bound HERMES_SESSION_KEY, with the agent id as the fallback for
callers with no gateway (unit tests, a bare CLI). The E2E passes a rotated agent id and drives
the card by the gateway key.

* fix(connectors): the forced-reconnect gate reads any non-active row; a failed re-mint of an expired row is failed

Three follow-ups from the verification of the fix pass.

The awaiting_new_attempt gate cleared only on the literal `connectionStatus: initiated`. The
field is optional on the wire and `initializing`, `failed`, `expired` are valid values, so a
forced reconnect could wait the full 300 s and swallow a failed new attempt. The gate now holds
only while the row still reads as the old account (`connected` or `active`) and releases on
anything else.

Try again on an `expired` row whose re-mint fails raised IllegalTransition (no expired → failed
edge). The re-mint steps through `initiated` as the user's attempt, then `failed`, then drops the
dead link.

`detail` never carries a state name any more: `failed` as detail rendered as the row label and
made agent/display.py tag the settled result as a tool error. Only vendor text goes there.

`connection.expire` removed from the renderer's unscoped-stream set; nothing emits it.
2026-09-15 00:41:14 +05:30

366 lines
15 KiB
Python

"""Managed connectors on the connection operation.
Contracts:
- connect/reconnect mint ONE operation, block the turn via the callback, return per-target
outcomes; links live on the target and never in the model result on a desktop session
- off-desktop (no callback): result carries connect_url and returns at once (PR3 delivers it)
- reconnect is a repair: active → connected with no gateway mint; force → always reinitiate
- the watcher polls the gateway once per tick, transitions targets, settles on all-resolved
- ``wait`` is gone from the schema
- ``statusReason`` from the mint is kept as detail; the generic list copy never overwrites it
"""
import json
import threading
from unittest.mock import patch
import pytest
import tools.connectors.tool # registers the tool
from tools.connectors import contract as c
from tools.connectors import live
from tools.connectors.tool import MANAGE_CONNECTIONS_SCHEMA, manage_connections
@pytest.fixture(autouse=True)
def _clean_live():
live.reset_for_tests()
yield
live.reset_for_tests()
class GatewayFake:
"""Scripted gateway. ``flips`` maps connector -> the list call number on which it reports connected."""
def __init__(self, connected=(), flips=None, mint_status="initiated", status_reason=None):
self.connected = set(connected)
self.flips = dict(flips or {})
self.mint_status = mint_status
self.status_reason = status_reason
self.lists = 0
self.mints = []
self.statuses = {} # slug -> connectionStatus per list call (last value repeats)
def list_connectors(self):
self.lists += 1
for slug, on in self.flips.items():
if self.lists >= on:
self.connected.add(slug)
rows = []
for s in ("gmail", "notion"):
row = {"connector": s, "enabled": True, "connected": s in self.connected}
script = self.statuses.get(s)
if script:
row["connectionStatus"] = script[min(self.lists, len(script)) - 1]
row["connected"] = row["connectionStatus"] == "active"
rows.append(row)
return rows
def connections(self, connectors, *, reinitiate=False):
self.mints.append((tuple(connectors), reinitiate))
results = []
for slug in connectors:
row = {"connector": slug, "status": self.mint_status, "reinitiated": reinitiate}
if self.mint_status == "initiated":
row["connect_url"] = f"https://connect.example/{slug}/{len(self.mints)}"
if self.status_reason:
row["status_reason"] = self.status_reason
results.append(row)
return {"results": results, "summary": {"total": len(connectors)}}
def _desktop_callback(answer=None):
"""A callback that emits the card and returns immediately (fire-and-forget, PR2 shape)."""
seen = []
def cb(payload):
seen.append(payload)
return answer
cb.seen = seen
return cb
def _run(args, gw, *, callback=None, tick=0.0, platform="desktop"):
with patch("tools.connectors.run.WATCH_INTERVAL_SECONDS", tick), \
patch("tools.connectors.managed.session_platform", return_value=platform):
return json.loads(manage_connections(
args, client_factory=lambda: gw, connection_callback=callback, session_id="s1",
))
# ---------------------------------------------------------------------------
# schema
# ---------------------------------------------------------------------------
def test_reason_is_gone_from_the_schema():
assert "reason" not in MANAGE_CONNECTIONS_SCHEMA["parameters"]["properties"]
def test_wait_is_gone_and_force_exists():
props = MANAGE_CONNECTIONS_SCHEMA["parameters"]["properties"]
assert "wait" not in props["action"]["enum"]
assert "timeout_seconds" not in props
assert props["force"]["type"] == "boolean"
out = json.loads(manage_connections({"action": "wait", "connectors": ["gmail"]}))
assert "action must be one of" in out["error"]
# ---------------------------------------------------------------------------
# desktop: one op, blocks, no URL in the result
# ---------------------------------------------------------------------------
def test_desktop_connect_mints_once_emits_the_card_and_returns_outcomes_without_urls():
gw = GatewayFake(flips={"gmail": 2, "notion": 3})
cb = _desktop_callback()
out = _run({"action": "connect", "connectors": ["gmail", "notion"]}, gw, callback=cb)
assert gw.mints == [(("gmail", "notion"), False)] # one mint for every target, up front
(payload,) = cb.seen
assert payload["op_id"] == out["op_id"]
assert [t["name"] for t in payload["targets"]] == ["gmail", "notion"]
assert all(t["kind"] == "connector" and t["action"] == "connect" for t in payload["targets"])
assert out["status"] == "settled" and out["settled_by"] == "all_resolved"
assert {t["state"] for t in out["targets"]} == {"connected"}
assert "connect_url" not in json.dumps(out)
assert live.current("s1") is None # closed on settle
def test_desktop_connect_url_stays_on_the_live_operation_for_the_panel():
gw = GatewayFake(flips={"gmail": 2})
captured = {}
def cb(payload):
captured["op"] = live.get("s1", payload["op_id"])
return None
_run({"action": "connect", "connectors": ["gmail"]}, gw, callback=cb)
snap = captured["op"].result()["targets"][0]
assert snap["connect_url"].startswith("https://connect.example/gmail/")
def test_watcher_transitions_on_flip_and_settles_by_deadline_when_nothing_flips():
gw = GatewayFake()
with patch("tools.connectors.operation.OPERATION_DEADLINE_SECONDS", 0.05):
out = _run({"action": "connect", "connectors": ["gmail"]}, gw, callback=_desktop_callback(), tick=0.01)
assert out["settled_by"] == "deadline"
assert out["targets"][0]["state"] == "not_connected"
assert gw.lists >= 2 # it did poll
def test_watcher_polls_once_per_tick_for_the_whole_operation():
gw = GatewayFake(flips={"gmail": 3, "notion": 3})
_run({"action": "connect", "connectors": ["gmail", "notion"]}, gw, callback=_desktop_callback())
assert gw.lists == 3 # shared scan, not one per target
def test_respond_from_the_card_skips_a_target_and_wakes_the_loop():
gw = GatewayFake(flips={"gmail": 2})
done = threading.Event()
def cb(payload):
def answer():
operation = live.get("s1", payload["op_id"])
operation.transition("notion", c.TargetState.skipped, c.Actor.user)
done.set()
threading.Timer(0.02, answer).start()
return None
out = _run({"action": "connect", "connectors": ["gmail", "notion"]}, gw, callback=cb, tick=0.01)
assert done.is_set()
by = {t["name"]: t for t in out["targets"]}
assert by["gmail"]["state"] == "connected" and by["notion"]["state"] == "skipped"
assert out["settled_by"] == "all_resolved"
def test_mint_failure_detail_survives_the_generic_list_copy():
gw = GatewayFake(mint_status="failed", status_reason="vendor: bad scope")
with patch("tools.connectors.operation.OPERATION_DEADLINE_SECONDS", 0.05):
out = _run({"action": "connect", "connectors": ["gmail"]}, gw, callback=_desktop_callback(), tick=0.01)
target = out["targets"][0]
assert target["state"] == "not_connected" # failed is unresolved; deadline stamped it
assert target["detail"] == "vendor: bad scope"
# ---------------------------------------------------------------------------
# reconnect = repair
# ---------------------------------------------------------------------------
def test_reconnect_on_an_active_target_makes_no_gateway_mint():
gw = GatewayFake(connected={"gmail"})
out = _run({"action": "reconnect", "connectors": ["gmail"]}, gw, callback=_desktop_callback())
assert gw.mints == []
assert out["targets"][0]["state"] == "connected"
assert out["settled_by"] == "all_resolved"
def test_reconnect_force_always_reinitiates_even_when_active():
gw = GatewayFake(connected={"gmail"}, flips={"gmail": 1})
with patch("tools.connectors.operation.OPERATION_DEADLINE_SECONDS", 0.05):
_run({"action": "reconnect", "connectors": ["gmail"], "force": True}, gw, callback=_desktop_callback(), tick=0.01)
assert gw.mints == [(("gmail",), True)]
def test_force_does_not_settle_connected_from_the_old_account():
"""An account switch: the vendor keeps the old account active while the new link waits. `connected`
on the list is the old account until the row has read as anything else once."""
gw = GatewayFake(connected={"gmail"})
gw.statuses = {"gmail": ["active", "active", "initializing", "active"]}
out = _run({"action": "reconnect", "connectors": ["gmail"], "force": True}, gw, callback=_desktop_callback(), tick=0.01)
assert out["settled_by"] == "all_resolved"
assert out["targets"][0]["state"] == "connected"
assert gw.lists == 4 # reads 1-2 were the old account; 3 was the new attempt; 4 saw it connected
def test_force_reads_a_failed_new_attempt_as_failed_not_as_still_waiting():
gw = GatewayFake(connected={"gmail"})
gw.statuses = {"gmail": ["active", "failed"]}
seen = []
def cb(payload):
op_id["v"] = payload["op_id"]
op_id = {}
original = gw.list_connectors
def spy():
rows = original()
op = live.get("s1", op_id["v"]) if op_id else None
if op is not None:
seen.append(op.target("gmail").state.value)
return rows
gw.list_connectors = spy
with patch("tools.connectors.operation.OPERATION_DEADLINE_SECONDS", 0.2):
_run({"action": "reconnect", "connectors": ["gmail"], "force": True}, gw, callback=cb, tick=0.01)
# Read 1 saw the old account (still initiated); the failed row on read 2 was applied, not swallowed.
assert "failed" in seen
def test_reconnect_on_a_disconnected_target_reinitiates():
gw = GatewayFake(flips={"gmail": 2})
_run({"action": "reconnect", "connectors": ["gmail"]}, gw, callback=_desktop_callback())
assert gw.mints == [(("gmail",), True)]
# ---------------------------------------------------------------------------
# off-desktop: links in the result, returns at once
# ---------------------------------------------------------------------------
def test_off_desktop_connect_returns_links_and_does_not_block():
gw = GatewayFake()
out = _run({"action": "connect", "connectors": ["gmail"]}, gw, callback=None, platform="cli")
assert out["status"] == "initiated"
assert out["targets"][0]["connect_url"].startswith("https://connect.example/gmail/")
assert "op_id" in out
assert gw.lists == 0 # no watcher without a card
assert live.current("s1") is None
def test_platform_not_callback_presence_decides_the_url():
# The TUI-in-a-terminal has a gateway callback attached but no card; the URL must be in the result.
gw = GatewayFake()
cb = _desktop_callback()
out = _run({"action": "connect", "connectors": ["gmail"]}, gw, callback=cb, platform="tui")
assert out["targets"][0]["connect_url"]
assert cb.seen == [] # no card emitted off-desktop
# ---------------------------------------------------------------------------
# one open op per session
# ---------------------------------------------------------------------------
def test_second_connect_while_an_operation_is_open_is_refused():
gw = GatewayFake()
operation = live.open_new([("gmail", "connector", "connect")], "s1") if hasattr(live, "open_new") else None
if operation is None:
from tools.connectors import operation as op
operation = op.ConnectionOperation([op.Target("gmail", "connector", "connect")], session_key="s1")
live.open(operation)
out = _run({"action": "connect", "connectors": ["notion"]}, gw, callback=_desktop_callback())
assert "already open" in out["error"] and operation.op_id in out["error"]
assert gw.mints == []
# ---------------------------------------------------------------------------
# settle races and terminal targets (verification findings P1-1, P1-7, P1-8)
# ---------------------------------------------------------------------------
def test_connected_read_on_a_failed_target_is_ignored_not_an_error():
"""A failed mint whose account later reads connected must not raise out of the watcher."""
gw = GatewayFake(mint_status="failed", status_reason="denied", flips={"gmail": 1})
with patch("tools.connectors.operation.OPERATION_DEADLINE_SECONDS", 0.05):
out = _run({"action": "connect", "connectors": ["gmail"]}, gw, callback=_desktop_callback(), tick=0.01)
assert "error" not in out
assert out["targets"][0]["state"] in {"failed", "not_connected"}
assert out["targets"][0]["detail"] == "denied"
def test_continue_during_a_connected_read_keeps_the_settled_result():
"""Settling while a list read is in flight must not let that read's `connected` raise into tool_error."""
gw = GatewayFake()
settled = threading.Event()
original = gw.list_connectors
def slow_list():
rows = original()
if gw.lists == 2:
live_op = live.get("s1", op_id["v"])
live_op.settle(c.SettleReason.continue_)
settled.set()
gw.connected.add("gmail")
rows = original()
return rows
gw.list_connectors = slow_list
op_id = {}
def cb(payload):
op_id["v"] = payload["op_id"]
return None
out = _run({"action": "connect", "connectors": ["gmail"]}, gw, callback=cb, tick=0.01)
assert settled.is_set()
assert "error" not in out
assert out["settled_by"] == "continue"
assert out["targets"][0]["state"] == "not_connected"
def test_settle_reason_is_not_written_into_the_row_detail():
gw = GatewayFake()
with patch("tools.connectors.operation.OPERATION_DEADLINE_SECONDS", 0.05):
out = _run({"action": "connect", "connectors": ["gmail"]}, gw, callback=_desktop_callback(), tick=0.01)
assert out["settled_by"] == "deadline"
assert out["targets"][0]["state"] == "not_connected"
assert "detail" not in out["targets"][0]
def test_interrupt_wakes_the_loop_and_settles_before_the_next_tick():
from tools.interrupt import set_interrupt
gw = GatewayFake()
worker = {}
def cb(payload):
worker["tid"] = threading.current_thread().ident
def stop():
set_interrupt(True, worker["tid"])
threading.Timer(0.02, stop).start()
return None
import time
started = time.monotonic()
try:
with patch("tools.connectors.operation.OPERATION_DEADLINE_SECONDS", 10):
out = _run({"action": "connect", "connectors": ["gmail"]}, gw, callback=cb, tick=5.0)
finally:
set_interrupt(False, worker.get("tid"))
assert out["settled_by"] == "interrupt"
assert time.monotonic() - started < 2.0 # woke on the interrupt, not on the 5 s tick